A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
Engine Speed Sensor: Service and Repair
Adaptation (Scan Tool Function 10)
Individual functions are called up by entering the appropriate adaptation channel numbers (listed in the adaptation table).
NOTE:
-
Using measuring value blocks 10, 11, 12 and 15, the values that need to be transferred to the new instrument cluster can be read out before
replacement.
-
Adaptation channels 42, 43, and 44 (See measuring value blocks 013 and 014) must be adapted according to the oil quality (measuring value block
15).
-
Adaptation channels 60, 61, and 62 are only needed when the instrument cluster communicates with the corresponding BUS system..
-
Measuring value blocks 125 and 126 indicate the components that are part of the powertrain data-BUS.
-
Measuring value block 130 indicates the components that are part of the comfort system data-BUS.
-
Measuring value block 140 indicates the components that are part of the information data-BUS.
Adaptation table :
Adaptation channel
Adaptation function
02
Resetting SRI after service
03
Adaptation of fuel gauge
04
Language version of driver information display
09
Odometer
18
Adaptation of auxiliary heater
30
Adaptation of fuel gauge sender resistance range
35
Adaptation of engine speed threshold
40
Adaptation for distance driven since service
41
Adaptation for time since service
42
Adaptation for minimum mileage performance
43
Adaptation for maximum mileage performance
44
Adaptation for maximum time interval
45
Adaptation for oil quality
46
Adaptation for total consumption quantity (only gasoline engines)
60
Adaptation powertrain data-BUS
61
Adaptation comfort system data-BUS
62
Adaptation information data-BUS
Initiating "Adaptation" function 10
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press buttons -1- and -0-. This selects "Adaptation", function 10.
-
Press -Q- button to confirm input.
Indicated on display
Rapid data transfer
Q
10-Adaptation
-
Press -Q- button to confirm input.
Indicated on display:
Adaptation
Input channel number XX
-
Enter desired adaptation channel (adaptation table).
-
Press -Q- button to confirm input.
NOTE: After changing an adaptation value or ending an adaptation channel, "Adaptation " function 10 must be performed again before selecting
another adaptation channel.
Adaptation Of The Engine Speed Threshold