A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
Relay Box: Service and Repair
Central Electric Unit and Relay Panel, Removing and Installing
Central Electric Unit And Relay Panel, Removing And Installing
NOTE: The relay panel is only required for certain optional equipment, and is not standard equipment.
-
Remove driver's-side knee bar.
-
Remove both mounting bolts -C- (2 Nm or 18 in. lb) and disconnect all screw connections -D- and -E- if necessary.
-
Pull out relays and control modules and then unclip relevant relay panel.
-
Remove central electric unit -B- and relay panel -A- from bottom.