A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
-
Lower belt webbing must be bolted to metal stud - 10 - as shown in magnified area
-
Remainder of installation is reverse of removal
-
After installing passenger side three-point seat belt, check belt function for child seat.
-
Three-point seat belt must not be hindered by cables, wires or dampening material etc.
10
-
Metal stud in floor pan
-
Anti-twist stop for belt webbing bracket
11
-
Anti-twist stop and reverse-mounting protection for three-point safety belt
Fig. 1 Installing upper B-pillar trim in belt height adjuster
-
Guide slide with button - 4 - (without pressing) beginning at top and working downward into release lever - 1 - of height adjuster while
simultaneously installing pin - 2 - into mounting - 3 -.