A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
3 (Ground-GND-)
108
-
Repair open circuit or short circuit if necessary.
If, after erasing the DTC memory for a test, a DTC relating to the Camshaft Position (CMP) sensor (hall sensor) is indicated again, even though all
previous tests were OK, the following malfunction is possible:
-
Shutter wheel for Camshaft Position (CMP) sensor is not aligned properly.
-
Unscrew Camshaft Position (CMP) sensor and check whether shutter wheel is mounted properly at camshaft (if mounted improperly, locking lug
will get squished when mounting bolt is tightened).
-
If position of shutter wheel is OK, check allocation of crankshaft/camshaft.