A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
![background image](/audi/a4_quattro_wagon/l4-1.8l_turbo_(atw)/Page-6014001.png)
Steering Angle Sensor: Service and Repair
Steering angle sensor, removing and installing
WARNING:
-
Before working on any airbag, steering wheel or steering column components first always disconnect the battery.
-
The wheels should be in a straight ahead position before removing the steering wheel
-
Failing to observe these safety precautions may result in failure of the airbag system when the vehicle is driven.
CAUTION: Before disconnecting the battery, determine file correct coding for the anti-theft radio
-
Remove drivers side airbag from steering wheel.
-
Disconnect airbag harness connector.
-
Disconnect harness connector for steering angle sensor (arrow).
-
Remove steering wheel.
Removing steering column switch
-
Unlock steering column adjustment.
-
Pull steering column out to stop.
-
Remove screw -1- (2x).
Tightening torque: 3 Nm (27 inch lbs.)
-
Remove handle -2-.