A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
-
Carry out corrosion protection measures, as needed, to holes used for 3393 testing mandrel.
Tightening sequence
CAUTION: The bonded rubber bushings can only be turned to a limited extent. The bolted connections on the suspension links should therefore only
be tightened when the vehicle is standing on the ground.
-
Tighten bolts -2- and -5- to 110 Nm (81 ft. lbs.) + 1/4-turn (90°).
-
Tighten bolts -6- to 75 Nm (55 ft. lbs.).
-
Tighten bolts -1- to 23 Nm (17 ft. lbs.).
-
Tighten nuts -3- and -4- to 40 Nm (30 ft. lbs.).
-
Tighten bolts for lower track control link to 80 Nm (59 ft. lbs.) + 1/4-turn (90°).
-
Tighten guide link bolts to 90 Nm (66 ft. lbs.) + 1/4-turn (90°).
-
Attach coupling link to stabilizer bar using new ribbed nuts and tighten to 100 Nm (74 ft. lbs.).
-
Attach suspension strut to lower track control link.
Tightening torque: 90 Nm (66 ft. lbs.)
-
Install ABS wheel speed sensor wiring into retainer on brake caliper.
-
Install wheels.