A4 Quattro Wagon L4-1.8L Turbo (AWM) (2001)
Front Bumper Bracket: Service and Repair
Bracket For Front Bumper, Removing And Installing
1
-
Bracket for front bumper
-
The bracket has two parts. The rear half can be shifted to adjust the length.
2
-
Combination bolts
-
1.5 Nm.
-
Tighten bolts in sequence: - a -, - b - then - c -.
3
-
Bumper
4
-
Fender
5
-
Metal bolt
-
1.5 Nm.
6
-
Wheelhousing liner
Fig. 1 Front bumper height adjustment
-
Bumper - 1 - height is adjusted by shifting the threaded sleeve - 2 - in the impact absorber - 3 -.
-
Tighten combination bolt to 23 Nm when installing bumper.
-
Bolt - 4 - is for securing the impact absorber to the lock carrier, e.g. for service position.
-
Tightening torque 4 Nm