A4 Quattro Wagon L4-1.8L Turbo (AWM) (2001)
Splash Guard: Service and Repair
Noise Insulation Panel, Assembly Overview
1
-
Quick-release screw
-
Remove only this quick release screw for service position
-
Three pieces
-
2 Nm (18 in.lb)
2
-
Front noise insulation
3
-
Quick release screw
-
Three pieces
-
If rear noise insulation panel is also - 4 - being installed, then longer quick-release screws must be used
-
2 Nm (18 in.lb)
4
-
Rear noise insulation panel
-
Only installed for certain engine types
-
Installed over noise insulation panel - 2 -
5
-
Quick-release screw
-
Two pieces
-
2 Nm (18 in.lb)