A4 Quattro Wagon L4-1.8L Turbo (AWM) (2001)
/Page-1556003.png)
Note: Observe cleanliness rules when working on the automatic gearbox:
^
Place drip tray underneath to collect oil.
^
Remove ATF lines/hoses from radiator:
^
Tie ATF lines to longitudinal member to avoid leakage of fluids.
All models:
CAUTION! The air conditioner refrigerant circuit must not be opened.
Note: To prevent damage to the condenser and refrigerant pipes/hoses, ensure that the pipes and hoses are not stretched, kinked or bent.
^
Remove air cowls from radiator -4- (left and right).
^
Remove securing bolts -1- and -2- for condenser.
^
Disconnect connector -3- from air conditioner pressure switch -F129-.
^
Pull condenser up out of its bracket, pivot toward side and secure to right-hand front wheel with wire.
Note: Protect fender panel from damage.
^
Release two retaining pins for radiator and pull out upward -arrows-.
^
Pivot radiator toward front and lift out.
Installing
Installation is carried out in the reverse order of removal.
^
Install front bumper:
^
Top up coolant.
Vehicles with automatic gearbox:
^
Attach ATF lines.
^
Check ATF level:
