A4 Quattro Wagon L4-1.8L Turbo (AWM) (2001)
/Page-1341009.png)
-
Carefully remove sealant residues from cylinder block (remove baffle plate).
-
Remove remaining sealant from oil pan, e.g. with a rotating plastic brush.
WARNING! Wear protective glasses.
-
Clean sealing surfaces: they must be free of oil and grease.
Installing
Installation is carried out in the reverse order of removal.
Note:
The oil pan must be installed within 5 minutes after applying the silicone sealant.
-
Cut off nozzle of tube at front marking (diameter of nozzle approximately 3 mm).
-
Silicone sealant D1 76404A2
-
Thickness of sealant bead: 2 to 3 mm
Note:
The bead of sealant must not be thicker than 3 mm, as otherwise excess sealant will enter the oil pan and obstruct the strainer in the oil
intake pipe.
