A4 Quattro Wagon L4-1.8L Turbo (AWM) (2001)
This function is used to adapt the odometer after the instrument cluster is replaced.
NOTE:
-
The adaptation is only possible for an instrument cluster with a maximum mileage of 100 miles.
-
Adaptation can only be performed once for each instrument cluster.
-
Only larger adaptation values can be entered (more than 100 miles).
-
If an incorrect value is entered and confirmed, it cannot be changed. If this happens, the instrument cluster must be replaced.
-
In countries where speedometers are calibrated in miles, adaptation can be performed in miles.
-
Observe notes when replacing instrument cluster.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -1- and 1-. This selects "Login Procedure" function 11.
Indicated on display:
Rapid data transfer
Q
11-login procedure
-
Press -Q- button to confirm input.
Indicated on display:
Login procedure
Input code number XXXXX
-
Input code number 13861.
Indicated on display:
Login-Procedure
Q
Input code number 13861
-
Press -Q- button to confirm input.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -1- and -0-.
Indicated on display:
Rapid data transfer
Q
10 - Adaptation
-
Press -Q- button to confirm input.
Indicated on display:
Adaptation
Input channel number XX
-
Press buttons -0- and -9-.
-
Press -Q- button to confirm input.
Indicated on display:
Channel 9 Adaptation 0
->
Mileage in 10 miles
< -13- >