A4 Quattro Wagon L4-1.8L Turbo (AWM) (2001)
-
Align marking on camshaft sprocket with marking at cylinder head cover.
-
Place toothed belt on crankshaft sprocket observe direction of rotation).
-
Install toothed belt guard - lower part.
-
Secure vibration damper/belt pulley with one bolt (note installation arrangement).
-
Set crankshaft to TDC for cylinder No. 1.
-
Install toothed belt onto coolant pump, then tensioning roller, and finally camshaft sprocket.
-
Unscrew socket head fastener T10092.
-
Pull out pin T40011 from tensioner.
The pressure piston of the tensioner for the toothed belt loosens.