A4 Quattro Wagon L4-1.8L Turbo (AWM) (2001)
Steering Wheel: Reading and Clearing Diagnostic Trouble Codes
With Manufacturer Scan Tool
Erase DTC Memory (Scan Tool Function 05)
NOTE: If DTC memory cannot be erased, check DTC memory again and repair malfunction.
Requirements
-
DTC memory checked
-
All malfunctions repaired
After successful DTC memory check:
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -5-. This selects "Erase DTC memory", function 05.
Indicated on display
Rapid data transfer
Q
05 Erase DTC memory
-
Confirm input using the -Q- button.
Indicated on display
Rapid data transfer
->
DTC memory is erased!
DTC memory is erased.
-
Press the -> button.
Indicated on display
Rapid data transfer
HELP
Select function XX
NOTE:
-
This message indicates an error in the test sequence.
Attention!
->
DTC Memory was not interrogated
-
This message indicates an error in the test sequence.
Rapid data transfer
->
DTC Memory was not interrogated
Follow test sequence exactly: first check DTC memory, repair malfunction(s) if necessary, then erase.