A4 Quattro Wagon L4-1.8L Turbo (AWM) (2001)
Seals and Gaskets: Service and Repair
Shift Rod Seal, Replacing
5 Speed A/T 01V
Shift rod seal, replacing
Special tools and equipment
^
3385 sealing ring installer
Removing
-
Removing left transmission support.
-
Removing Multi-Function Transmission Range (TR) Switch -F125-.
-
Drive out spring dowel sleeve -1- at lever/shift rod -2- in direction of travel toward the front (arrow), until the lever/shift rod can be pulled off the
shift rod.
-
Pierce sealing ring using a small screwdriver and pull out.
Installing
-
Coat outer circumference and gap between sealing lips with ATF.
^
Installation position: The open side of the sealing ring faces the transmission.