A4 Quattro Wagon L4-1.8L Turbo (AWM) (2001)
16. Nut, 10 Nm
17. Shift mechanism housing
18. Pivot pin
19. Locking latch
20. Shift Lock
21. Pivot pin
22. Cover
23. Nut, 10 Nm
24. Locking clamp
25. Locking plate
26. Selector lever cable
27. Hex bolt, 23 Nm
28. Pivot
29. Cable ties
30. Ignition/Starter - Switch
31. Locking cable
32. Catch lever
33. Retaining spring
34. Storing
Fig. 1 Securing spring for locking cable, removing and installing
Removing
-
To remove locking cable, slightly lift spring at top (arrow B).R
-
Unhook spring (arrow A) at retaining clip (arrow C) and remove toward top.
Installing
-
Insert spring (arrow B) from top and hook in at retaining clip (arrow C).
-
Align spring so that it is seated evenly in groove (arrow A).
-
To install locking cable, slightly lift spring at top (arrow B).