Audi Workshop Service and Repair Manuals

Rear Door Window Regulator: Service and Repair
Window Regulator and Door Window, Separating

Window Regulator And Door Window, Separating

1

-

Window frame

-

Removing:
-

Remove door trim.

-

Window frame removed together with window regulator from door.

-

Door window - 4 - removed.

-

To remove, unscrew countersunk screw - 7 - and remove window regulator from window frame.

-

Installation:
-

When installing, make sure that guide rail, arrow - A -, runs parallel to guide arrow - B -

-

Tighten bolts - 7 - to 6 Nm.

2

-

Triangular panel
-

Before removing, disassemble window frame and window regulator.

-

Unscrew bolt - 3 - and remove panel sideways.

3

-

Countersunk screw
-

5 Nm

4

-

Window

-

Removing:
-

Drive down door window fully.

-

Unscrew bolts - 5 - and remove door windows from window regulator.

-

Installation:
-

Insert window into window regulator.

-

Screw bolts - 5 - into window regulator, but do not tighten yet.

-

Drive door window upward into window frame.

-

Pull door window toward front into window guide on window frame at B-pillar and tighten bolts - 5 - to 4 Nm.