A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
-
Disengage locking mechanism on left and right at top of trim using special hook 3370
-
Carefully remove spring clips - 4 - for lower trim on left and right from rear lid.
-
Reach between trim and rear lid and disengage four more spring clips - 4 -.
-
Remove trim.
-
Installing:
Installation is reverse of removal. Observe the following when doing so:
-
Make sure that the trim engages into plate on lid lock.
CAUTION: Ensure trim is held securely.
4
-
Spring clips (Qty. 6)
Lower trim, disengaging from retainer
-
Disengage locking mechanism on left and right at top of trim using special hook 3370 arrow -.
Upper lid trim, removing and installing
1
-
Screws, (2x)
-
Tightening torque 1.5 Nm
2
-
Upper rear lid trim