A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
Passenger Assist Handle: Service and Repair
Roof Grab Handle, Removing And Installing
Special tools, testers and auxiliary items required
-
Torque wrench V.A.G 1783
Removing
-
Open covers - 3 -.
-
Remove bolts - 2 -.
Tightening torque: 3.5 Nm
-
Remove roof grab handle - 1 -.
NOTE:
-
Threaded holes for roof grab handle must be cleaned of locking compound residue after removal. Otherwise, new screws could lock up when
installed and shear off when removed again.
-
They can be cleaned with a thread cutter.
-
Replace roof grab handle screws (self-locking).
Installing
Installation is reverse of removal.