A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
/Page-1524001.png)
Temperature Sensor (Gauge): Locations
Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI Engine, Multi-pin Connector Assignments
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
Preparations
Location: on rear right of engine.
-
Disconnect electrical connection at sensor - 1 -.
Pin assignment for 2-pin connector on engine coolant temperature sensor G62
1. Wiring from sensor to instrument cluster (temperature gauge)
2. Ground (GND) ( - )
