A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
Camshaft: Service and Repair
Camshafts, Removing and Installing
Camshafts, removing and installing
Special tools, testers and auxiliary items required
Puller T40001
Counter-holder tool 3036
Removing
Note:
^
The sealing surfaces of the lower bearing bracket and on upper cylinder head must not be reworked.
^
The camshaft bearings are integrated into the cylinder head and into the bearing bracket. Before removing the bearing bracket, the toothed belt
must be relieved of tension.
^
If the bearing bracket was loosened, the camshaft seal and the sealing cap must be replaced.
-
Remove cylinder head cover
-
Remove camshaft adjuster.
-
Remove toothed belt
-
Loosen camshaft adjuster (use retainer 3036).