A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
^
The camshafts must be fixed in place using camshaft locating tool T10252.
-
Place chain onto camshaft adjuster.
-
Hold camshaft adjuster in front of exhaust camshaft so that the notch - A - and pin - B - are positioned across from one another.
-
In this position, first place the chain at top - arrow - onto chain sprocket of the intake manifold.
-
Slowly turn intake camshaft using toothed belt tensioner tool T10020 in direction of - arrow A - until camshaft adjuster fits onto camshaft.
Note: If the pin does not fit into the notch: Remove the chain and then re-install the chain again.
-
Tighten bolt of camshaft adjuster to 100 Nm. Do this using socket T40080.