A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
/Page-1455002.png)
8. 15 Nm
9. Sealing flange with rear oil seal
^
Only replaced as complete unit
^
To install, use provided guide sleeve
^
To remove and install, remove oil pan
^
Do not oil or grease sealing lip of oil seal
^
Before installing, remove oil remains from crankshaft journal with a clean cloth
^
Guide sleeve may only be removed after sealing flange has been slid onto crankshaft pin.
Installing intermediate plate
-
Hook in intermediate plate at sealing flange and push it onto alignment sleeves - arrows -.
