A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
Compressor Clutch Hub: Service and Repair
Compressor Drive Unit, Checking, Replacing
Compressor Drive Unit, Checking, Replacing
-
Replacement involves removing compressor.
NOTE: If drive plate overload safeguard has been triggered, check freedom of movement of compressor before replacing drive unit. Replace
entire compressor if it is stiff.
1. Compressor drive shaft
-
Check; after tightening threaded connection, drive shaft must engage snugly in splines of drive pinion
-
Tightening torque 60 Nm
-
Loosening and tightening
-
Lubricate drive pinion splines with special grease G 000 100
2. Socket-head bolt
-
Tightening torque 10 Nm
3. Drive plate
-
With overload safeguard, triggered in the event of excessive torque (e.g. stiff compressor) and drive shaft just free- wheels without driving
compressor
-
Checking run-out and adjusting
4. Drive plate
-
Threaded to compressor drive shaft
-
With overload safeguard, triggered in the event of excessive torque (e.g. stiff compressor) and drive shaft just free- wheels without driving
compressor
-
Tightening torque 30 Nm
5. Rubber element
-
Isolates drive unit, damps vibration and sound