A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
/Page-2214002.png)
-
Remove fastening screw -A- for flanged shaft -B-.
-
Pull out flanged shaft.
-
Pull out flanged shaft seal -C- with VW 681.
-
Remove speedometer vehicle speed sensor.
Remove speedometer trigger wheel -D-:
-
Lever out the trigger wheel from the grooves in the differential at the drive pegs -arrows- on alternate sides.
Installing
Installation is carried out in the reverse order to removal, noting the following:
Installation position:
The drive pegs -arrows- of the trigger wheel -D- must engage in the grooves of the differential.
-
Drive in seal -C- for flanged shaft and install flanged shaft.
Tightening Torque
