A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
Accelerator Pedal Position Sensor: Service and Repair
Accelerator Pedal Module With Throttle Position (TP) Sensors, Removing and Installing
Accelerator Pedal Module With Throttle Position (TP) Sensors, Removing And Installing
Removing
-
Remove driver side storage tray.
-
Disconnect electrical connector -2-.
-
Remove bolts -1- and -3-.
-
Remove accelerator pedal module.
Installing
Installation is in reverse order of removal. Note the following:
-
Install driver side storage tray.
Vehicles with automatic transmission:
On vehicles with automatic transmission, the kick-down function must be adapted if the throttle position sensor or engine control module are replaced.
Torque specifications
Component
Nm
Accelerator pedal module to pedal mount
10