A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
/Page-2557005.png)
Harness connector Terminal 3
Test box Socket
N70 Cyl. 1
58
N127 Cyl. 2
41
N291 Cyl. 3
43
N292 Cyl. 4
56
Specified resistance 1.5 Ohms max.
If the specification is not obtained:
-
Repair the wiring connection.
If no malfunctions are found in the wiring:
-
Replace the faulty ignition coil.
Assembly is performed in the reverse order of removal, note the following:
Final procedures
After repair work, the following work steps must be performed in the mentioned sequence:
1. Check the DTC memory.
2. If necessary, erase the DTC memory.
3. If the DTC memory was erased, generate readiness code.
-
End diagnosis and switch ignition off.
