A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
Discharge Air Temperature Sensor / Switch: Service and Repair
Left Footwell Vent Temperature Sensor G261, Removing and Installing
Left Footwell Vent Temperature Sensor G261, Removing And Installing
-
Remove operating and display module, Climatronic Control Module J255.
-
Reach through opening for operating and display module, Climatronic Control Module J255 and disconnect connector - A-.
-
Give Left Footwell Vent Temperature Sensor G261 -B - approx. 90 degrees turn in direction of arrow.
-
Pull Left Footwell Vent Temperature Sensor G261 out of air conditioner.
NOTE: Observe arrangement of connectors to both sensors (Left Footwell Vent Temperature Sensor G261 and Right Footwell Vent Temperature
Sensor G262 to avoid interchange).