A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
/Page-954002.png)
-
When installing clutch pedal starter interlock switch F194, press clutch pedal - 1 - all the way down - arrowA -. Hold clutch pedal in this position.
-
Guide clutch pedal starter interlock switch F194 - 2 - through opening in retainer, and at the same time push operating rod against clutch pedal and
secure switch by turning it 45° in the direction indicated - arrowB -.
-
Connect electrical connector - 3 - on clutch pedal starter interlock switch F194.
-
Install storage compartment on drivers side.
