A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
/Page-3410003.png)
Installing
Install in reverse order of removal, noting the following:
CAUTION:
-
Before installing the ribbed belt, ensure that all subassemblies (generator, a/c compressor etc.) are securely mounted and turn freely.
-
When installing belt, ensure correct seating in the belt pulleys.
-
Reinstall all hose clamps, harness retainers and replace all removed cable ties as originally installed in production.
-
Note running direction of ribbed belt as previously marked and route as illustrated.
-
Top up coolant.
-
Reconnect battery. Required steps.
-
Start engine and check belt running.
Tightening torques
Component - fastener
Nm
Generator (GEN) to engine - bolt
23
Terminal 30/B+ to generator - nut
16
