audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Customer Interest for Alignment:|440902|Page 10408 > < Notes on Repairs on Wiring Harnesses and Connectors|Page 10401
Page 1
background image

Alignment: Customer Interest
Steering/Suspension - Vehicle Pull To One Side

44 Vehicle Pulls To One Side (B7)

44 09 02 2

016582/2 

February 9, 2009

Supersedes Technical Service Bulletin Group 44 number 07-01 dated November 29, 2007 for reasons listed below.

Vehicle Information

Condition

Customer complains the vehicle pulls or drifts to left or right.

Technical Background

The following is a list of common conditions that cause vehicles to pull or drift to one side:

-

Road crown or inclination.

-

Uneven or bumpy roads.

-

Driving on 2 different road surfaces at the same time.

-

Grooves in the road.

-

Crosswind.

-

Tires - pressure, size, type, and condition.

-

Wheel alignment settings.

It is also important to note that modern vehicles have more precise steering compared to their predecessors. This is partly due to increased caster and
reduction of friction in the steering and suspension components.

Production Solution

Not applicable.

Service

1. Perform a diagnostic test drive.

-

Note that no vehicle will continue driving in a straight line if both hands are taken off the steering wheel for some time. Many factors influence
a vehicle s ability to drive in a straight line.

Customer Interest for Alignment:|440902|Page 10408 > < Notes on Repairs on Wiring Harnesses and Connectors|Page 10401