A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
/Page-2926001.png)
Pressure Plate: Service and Repair
Clutch With SAC Pressure Plate (LUK Version), Servicing
Clutch with SAC pressure plate (LuK version), servicing, 02X, 6 Spd. M/T AWD
^
Please refer to notes.
^
Remove transmission to work on clutch.
Note:
^
SAC stands for Self-Adjusting Clutch.
1 - Dual-mass flywheel
^
Ensure that dowel pins fit tightly
^
Contact surface for clutch lining must be free of grooves, oil and grease
^
Observe instructions for removal
^
Removing and installing
2 - Needle bearing
^
Removing and installing
3 - Bolt for flywheel
^
Always replace
^
Bolt length: 22.5 mm; 60 Nm plus an additional 90° 1/4 turn
^
Bolt length: 43 mm; 60 Nm plus an additional 180° 1/4 turn
^
Observe instructions for removal
4 - Clutch plate
^
Installation position: Clutch lining must make full contact with flywheel
^
The marking Getriebeseite (if provided) faces pressure plate/transmission.
^
Coil springs (damper assembly) point toward pressure plate and transmission
^
Centralize
^
Clutch plate diameter
