A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
Pressure Plate: Service and Repair
Adjuster Ring In Sac Clutch Pressure Plate, Resetting
Adjuster ring in SAC clutch pressure plate, resetting, 02X, 6 Spd. M/T AWD
Note:
^
SAC stands for "Self-Adjusting Clutch".
^
When installing a new clutch plate in conjunction with a used SAC pressure plate, the adjuster ring in the pressure plate has to be reset by turning
it back as far as it will go. If you do not reset the adjuster ring in the pressure plate, the SAC pressure plate will operate with reduced clamping
force, which will cause excessive wear, especially of the clutch plate (clutch will then slip).
^
If the clutch plate is not replaced, it is not necessary to reset the adjuster ling.
^
New SAC pressure plates are pre-set accordingly, and do not have to be reset.
Special tools, testers and auxiliary items required
Press tool VW412
Thrust pad 3062
Procedure
-
Insert 3 bolts for securing pressure plate - A - into mounting holes on pressure plate located at 120° (1 3) intervals, as shown in illustration.
-
Screw 3 nuts - B - M8 onto bolts - A - and tighten nuts.