A4 Quattro Wagon Pressure Plate Specifications: 01E, 6 SPD M/T AWD
/Page-2916001.png)
Pressure Plate: Specifications
01E, 6 SPD. M/T AWD
Clutch with SAC pressure plate, 01E, 6 Spd. M/T AWD
1 - Dual-mass flywheel
3 - Bolt for flywheel
^
Always replace
^
Screw length 43 mm 60 Nm plus additional 180° turn
^
Screw length 22.5 mm 60 Nm plus additional 90° turn
4 - Clutch plate
^
Installation position:
^
Clutch lining must make full contact with flywheel
^
Marking "Getriebeseite" (if present) goes toward pressure plate and transmission
^
Spring pack (coil springs) toward pressure plate and transmission
^
Clutch plate diameter
5 - SAC pressure plate
6 - Bolt, 25 Nm
^
Tighten in small stages and in diagonal sequence
