A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Tow Sensor: Service and Repair
Towing Recognition Control Module
Removing
-
If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or " Guided
Functions".
-
Select the function or path:
-
Follow further instructions on display of (VAS 5051B).
-
Open the luggage compartment right side trim.
-
Release retaining clips - arrow - and tilt the towing recognition control module (J345) - item 1 - out of the retaining frame.
-
Disconnect the electrical connectors - 2 - and - 3 -.
Installing
Install in reverse order.