A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
/Page-2699008.png)
-
Tilt retaining frame - 3 - with control modules to the side.
-
Disconnect electrical connectors at the control modules in the retaining frame.
-
Remove retaining frame with control modules.
-
Press retaining clip - 1 - in direction of - arrow A - and tilt special purpose vehicle control module (J608) - 2 - in direction of - arrow B - out of
the retaining frame - 3 -.
Installing
‹› Tightening Specifications => [ retaining frame, tightening specifications ] See: Maintenance/Fuses and Circuit Breakers/Fuse Block/Service and
Repair/Wire Junction, Instrument Panel Relay/Fuse Panel and Luggage Compartment Relay/Fuse Panel Assembly Overview and => [ retaining
frame, tightening specifications ] See: Maintenance/Fuses and Circuit Breakers/Fuse Block/Service and Repair/Wire Junction, Instrument Panel
Relay/Fuse Panel and Luggage Compartment Relay/Fuse Panel Assembly Overview
Install in reverse order of removal, observing the following:
