A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Front Door Panel: Service and Repair
Inside Door Release Mechanism
Front Door Trim
Inside Door Release Mechanism
‹› Removal and installation is described for the driver door trim. The procedure is similar for the other door trim.
Removing
-
Remove the door trim. Refer to => [ Front Door Trim ]. See:
-
With interior locking button: Disconnect electrical harness connector - 2 -.
-
Versions with lighting: Disconnect electrical harness connector - 4 -.
-
Remove the screws - 1, 3, 6, 7, 8 and 9 -.
-
Remove the interior door mechanism - 5 - from the door panel.
Installation
To install, perform the steps used in removal in reverse order.
Tightening specifications, refer to => [ Door Trim Assembly Overview ] See: Front Door Trim Overview.