A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
‹› 19 Nm
7
Door Lock
‹› Removing and installing, refer to => [ Door Lock ] See: Service and Repair/Rear Door
8
Mounting Bracket
‹› Rear backing - 5 - slid into outer door panel.
‹› To install, engage mounting bracket with loosely installed screw - 10 - in door, slide forward and tighten screw to 2.5 Nm.
9
Actuating Link
‹› Engage in door lock.
10
Housing
‹› Before installing, attach cover cap - 7 -.
‹› Removing, refer to=> [ Outer Door Handle ] See: Service and Repair/Rear Door
11
Magnet
‹› For vehicles with the "keyless entry system"
12
Cover
‹› Removing and Installing, refer to => [ Remove the Housing Cap ] See: Service and Repair/Rear Door
13
Outer Door Handle Trim
‹› For vehicles without the "keyless entry system"
‹› Removing and Installing, refer to => [ Outer Door Handle Trim ] See: Service and Repair/Rear Door/Outer Door Handle Trim
14
Door Handle Sensor
‹› For vehicles with the "keyless entry system"
‹› Removing and installing, refer to => [ Left and Right Rear Outside Door Handle Touch Sensor ] See: Service and Repair/Rear Door.