A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
‹› Removing and installing
6
Bolt
‹› Tightening specification: 19 Nm.
7
Cover
‹› Unclip prior to removing the door handle.
8
Door Lock
9
Bolt
‹› 3.5 Nm
10
Cover
‹› With the cover for the door lock
‹› Removing and Installing, refer to => [ Door Lock Cover ] See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Front Doors
11
Mounting Bracket
‹› Removing and Installing, refer to => [ Mounting Bracket ] See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Front Doors
12
Actuating Link
‹› For the door lock
‹› Removing and Installing, refer to => [ Door Lock Actuating Link ] See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Front
Doors
13
Lock Cylinder
‹› For the driver door only
‹› Removing and Installing, refer to => [ Lock Cylinder ] See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Front Doors
14
Magnet
‹› For vehicles with the "keyless entry system"
15
Cover
‹› Driver side: for lock cylinder
‹› Passenger side: closed version
‹› Removing and Installing, refer to => [ Remove the Lock Cylinder Cap ] See: Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Front Doors
16
Outer Door Handle Trim
‹› For vehicles without the "keyless entry system"
‹› Removing and Installing, refer to => [ Outer Door Handle Trim ] See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Front
Doors
17
Door Handle Sensor
‹› For vehicles with the "keyless entry system"