A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Remove the seal - 1 - from the body flange.
-
Remove and remaining adhesive and clean the body flange.
-
Peel off the protective film from the adhesive tape and then press the seal with the joint facing the center of the vehicle. Pay attention to the
marking.
-
Press the seal into the front points.
-
Press the seal onto the front side.
-
Press the seal evenly onto the long side to prevent any excess length.
-
Then press the seal all the way around using the roller (3356).