A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
-
Disconnect all the wiring harness connectors to the backrest and free up the disconnected wiring harnesses.
‹› The wiring harness between the connector station and the side airbag is continuous.
-
Remove the bolts - 2 -.
-
Tilt the backrest - 3 - forward onto the seat pan - 1 -.
-
Press the seat pan upholstery to the side and carefully remove side airbag wiring harness - 4 - and, if necessary, all additional wiring harness
(depending on option equipment) from the seat pan.