A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
/Page-1556005.png)
‹› Brake System
‹› 01- On Board Diagnostic (OBD) capable systems
‹› 03 - Brake electronics
-
Select the following functions on the display:
‹› ABS/ASR/ESP control module J104
‹› ABS/ASR/ESP control module J104, functions
‹› J104 Coding control module
The following sensors should also be calibrated after replacing control module J104.
‹› Steering angle sensor G85
‹› Transverse acceleration sensor G200
‹› Longitudinal acceleration sensor G251
Use vehicle diagnosis, testing and information system (VAS 5051B) or (VAS 5052) for this.
-
On display, select:
‹› Chassis
‹› Brake System
‹› 01- On Board Diagnostic (OBD) capable systems
‹› 03 - Brake electronics
-
Select the following functions on the display:
‹› ABS/ASR/ESP control module J104
‹› ABS/ASR/ESP control module J104, functions.
-
Then perform the ESP driving and system test.
