A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
‹› For balance shaft timing chain
20
Guide pins
‹› 20 Nm
Pipe for the balance shaft - installation position
‹› The pin from the balance shaft pipe must fit into the groove - arrow -
Bearing Pins, Installation Position
‹› Replace and lubricate the O-ring - 1 -
‹› The alignment pin - arrow - for the bearing pins must engage in the hole in the cylinder block.
‹› Lubricate the bearing pins
Intermediate shaft sprocket tightening sequence