A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Center Mounted Brake Lamp: Service and Repair
High-Mount Brake Lamp, Preparing for Installation
High-Mount Brake Lamp, Preparing for Installation
‹› Because the high-mount brake light separates into its individual pieces when removed, it must be prepared for installation.
Procedure
-
Insert all 5 spring tabs - 3 - in the lamp housing - 2 -.
‹› The shorter side of the spring tab - arrow A - faces toward the bottom side of the high-mount brake light.
-
Engage retaining rail - 1 - and slide it in as far as the stop in direction of - arrow B -.