A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
‹› Ignore - 2 -.
-
Connect the remote control (V.A.G 1348/3A) with adapter cable (V.A.G 1348/3-3) with an adapter cable from the connector test set (V.A.G
1594C) at terminal - 1 -.
-
Using insulating tape, tape over the second terminal on the adapter cable (V.A.G 1348/3-3) - arrow - to prevent a short circuit.
-
Connect terminal - 5 - to the vehicle ground using a jumper cable from the connector test set (V.A.G 1594C ).
-
Route Remote Control (V.A.G 1348/3A) switch forward in engine compartment.
-
Remove seal - arrow -.