A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
-
Install new spark plugs.
Installing
-
Loosely place all ignition coils in spark plug shaft.
-
Align ignition coils to connectors and place all connectors evenly on ignition coils.
-
Press ignition coils evenly by hand onto spark plugs (do not use a hammer under any circumstances).
Installation is the reverse of removal.
Tightening Specifications
2.0 TFSI
Removing:
-
Remove engine cover.
-
Open both screws on the connector strip.
-
Using the puller (T40039) remove all the ignition coils approximately 30 mm out of the spark plug shaft.
-
Release the connector and pull all the connectors at the same time from the ignition coils.
-
Remove spark plugs using spark plug wrench (3122B).
-
Install new spark plugs.
Installing:
-
Loosely place all ignition coils in spark plug shaft
-
Align ignition coils to connectors and place all connectors evenly on ignition coils.