A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
-
Remove engine cover.
-
Remove the Intake Air Temperature (IAT) Sensor ( G42).
-
Spray the Intake Air Temperature (IAT) Sensor ( G42) with a commercially available cool spray while observing the temperature value on the
scan tool.
The temperature value must decrease.
-
End diagnosis and switch the ignition off.
If the intake air temperature does not decrease:
-
Replace the Intake Air Temperature (IAT) Sensor ( G42).
If the intake air temperature does decrease:
Checking internal resistance
-
Disconnect the Intake Air Temperature (IAT) Sensor (G42) electrical harness connector - 1 -.
-
Using a multimeter, check the Intake Air Temperature (IAT) Sensor (G42) terminals 1 to 2 for resistance.
Use the chart below for the specified values:
Specified values: