audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Manifold Pressure/Vacuum Sensor|Testing and Inspection|Page 3970 > < Manifold Pressure/Vacuum Sensor|Testing and Inspection
Page 2
background image

Test sequence

-

Disconnect the Charge Air Pressure Sensor (G31 ) electrical harness connector - arrow -.

-

Start engine and let it run at idle.

-

Using a multimeter, check the Charge Air Pressure Sensor (G31) electrical harness connector terminals 1 to 3 for voltage.

Specified value: min. 4.5 V

Manifold Pressure/Vacuum Sensor|Testing and Inspection|Page 3970 > < Manifold Pressure/Vacuum Sensor|Testing and Inspection