A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Oil Pressure Sensor: Service and Repair
Oil Pressure Switch
Oil Pressure Switch
Removing
‹› Place a cloth under the accessory assembly bracket to collect leaking engine oil.
-
Disconnect electrical connector - 1 - on Oil Pressure Switch (F22).
-
Remove the Oil Pressure Switch (F22) - 2 -.
Installing
Installation is in reverse order of removal, note the following:
‹› Tightening specifications. Refer to => [ Oil Filter and Oil Cooler Assembly Overview ] See: Engine, Cooling and Exhaust/Engine/Engine
Lubrication/Oil Cooler/Service and Repair/Oil Filter and Oil Cooler Assembly Overview.
‹› Replace sealing ring.
‹› To prevent coolant loss, insert the new Oil Pressure Switch (F22) in the connecting pieces immediately.
-
Check oil level.