A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Installing
Install in reverse order of removal, observing the following:
‹› Tightening specification => [ 4-pin relay/fuse panel with threaded connection,
tightening specifications ] See: Maintenance/Fuses and Circuit Breakers/Fuse Block/Service and Repair/Wire Junction, Instrument Panel Relay/Fuse
Panel and Luggage Compartment Relay/Fuse Panel Assembly Overview
-
Install driver side instrument panel cover
Relay/Fuse Panel Mount with Vehicle Electrical System Control Module
Observe notes on contact corrosion => [ Contact Corrosion ] See: Power and Ground Distribution/Wiring Harness/Service Precautions.
Removing
-
Remove instrument panel.
-
Remove air duct to the left instrument panel vent.
-
Remove vehicle electrical system control module ( J519) => [ Vehicle Electrical System Control Module ].
-
Remove nuts - 2 -.