audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Customer Interest for Instrument Panel Control Module:|901020|Page 383 > < A/C Control Head Module|Page 376
Page 1
background image

Instrument Panel Control Module: Customer Interest
Instruments - Fuel Gauge Won't Register Full

90 Fuel gauge does not reflect fuel tank is full

90 10 20 

2017835/5 

August 25, 2010

Supersedes Technical Service Bulletin Group 90 number 10-06 dated June 3, 2010 for reasons listed below.

AFFECTED VEHICLES

CONDITION

The fuel gauge does not show full even though the tank is completely filled. This may occur after the vehicle has been transported by a vehicle transport
truck.

TECHNICAL BACKGROUND

The lowered reading is triggered when the vehicles are loaded onto vehicle transport trucks or when parking on an incline. The vehicle is tilted, causing
the fuel level sensor value to change without there being a speed signal in the instrument cluster. As a result, the instrument cluster perceives a refueling
process.

PRODUCTION SOLUTION

Instrument cluster (J285) with software level 224 or greater.

SERVICE

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

2. Update the instrument cluster (J285) using the SVM action code as listed in the table below if necessary.

Customer Interest for Instrument Panel Control Module:|901020|Page 383 > < A/C Control Head Module|Page 376